Rose Marie: a 1940’s Wedding or Evening Gown.

This is another formal gown, named Rose Marie, by The Tailor’s Apprentice. As usual, I received it as a .pdf downloadable pattern (e-pattern or digitized pattern). This one had more pieces and took much longer to re-assemble but it was well worth my while!

Re-assembling the printed sheets and preparing for cutting.

The pattern allows you to make several outfits: a wedding or evening gown, with or without sleeves, long or short or even with flounced sleeves. You can make it short for day wear, or make it into a two-piece suit, again with a selection of sleeves. I chose a fabric I brought back from a holiday in Curacao. It has a vaguely vintage print on it which I thought suitable for this pattern.

I chose to make a two piece, sleeveless outfit as this fabric is very light cotton and would only be worn in our hot months… and I wasn’t sure there would be quite enough, as it was much narrower than usual. It was the right decision in the end as I had to be a little creative with the top and make a *stepped* front hemline. If you look at the picture of the whole outfit (below), you will see that the center panel of the blouse is a little shorter than the side ones. I didn’t bias hem that piece to prevent *cutting* the visual line across an unflattering width…. 😉

Rose Marie has the typical 1940’s sweetheart neckline which I find so feminine and pretty, especially for summer clothing. As I mentioned, I made it sleeveless. The instructions were very helpful and clear, explaining how to sew up the pattern in true ’40s style, with a side zipper or hooks and eyes or snaps. I opted for a zipper and although I used an invisible zipper, I did follow the instructions to make it hidden under a narrow placket. It does look better that way!

 Bias tape binding both front and back sweetheart necklines.

 The placket over the invisible zipper, on the side of the blouse.

 The bound blouse hemline.

As for the skirt, I chose to make an elasticized waistband (more comfortable and easier to pull on: my fingers have trouble these days with buttons, hooks and snaps even zipper pulls!) with an uneven hemline: the front being a few inches shorter than the back. There are instructions and indications on the pattern for making the skirt as well as for making a separate top.

In order to make an elasticized waistband, I cut the fabric straight up from the waistline, for 3 1/2 inches. That’s double the width of the elastic plus a little to turn under to make the casing. That seam line is sewn right on the waistline. I call this a *self-waistband*: it has no seams (less bulk too) and uses less fabric than making a facing which has to be sewn onto the skirt and then turned under to make the casing. I really had to be frugal with the fabric!!!

I made an uneven hem line because I wanted the skirt to be longer but because I realized in placing the pattern pieces on the fabric that there just wouldn’t be enough of it, I opted to make it shorter at the front and keep the length I wanted for the back.

One of the pictures included in the pattern shows a day suit of blouse and skirt. It shows how the skirt was trimmed with red (bias binding?) at the skirt hem and the same red is on the neckline and sleeve cuffs. I really liked that detail. I was able to find a light blue bias tape, pre-folded, that matched my fabric and so, I finished many edges with it: the curves of the sweetheart neckline both front and back and the lower hem of the blouse as well as the skirt’s hem. The binding adds a little body to the blouse’s hem and I like that effect.

  Pre-folded Bias Tape made hemming easy. It allowed me to have more length on the skirt as I wasn’t folding up a hem.

   

The front and back views of my version of Rose-Marie.

Sari Sailor Suit

Earlier this week I presented Veronica to you and mentioned Jenny. Jenny is now ready for you.

If you haven’t read my last post, I will explain who they are. Veronica and Jenny are two patterns produced by The Tailor’s Apprentice. Veronica is a 1940’s evening gown with a capelet and Jenny is a sailor suit, also from the 1940s. Lorna McKenzie is the designer and she has used actual clothing from the WWII years to draft these patterns. These were clothes owned by Miss Page. Lorna tells her story on her website. She also has 3 other 1940s patterns at the moment: a wedding dress, a day dress and an overall type thing! There will be more.

It took me a couple of days after downloading the digital patterns from Lorna to decide which fabric from my stash I would use for Jenny. It was a cinch choosing the fabric for Veronica!!! That’s why I started with that pattern. In the end, I chose to use another of my saris to make into the sailor suit. Once it was done, I was amused to observe that I had turned the formal gown Veronica into a day dress and the casual sailor suit into a dressier outfit, as you will see. Asi es la vida!!

By the way, digital patterns are as easy to use as store-bought ones. After receiving your file by e-mail, you print it out and re-assemble it, a bit like a puzzle, and then proceed with cutting the paper up and then cutting your fabric from it. When I say *like a puzzle* it actually is easier than that! All the pattern pieces are logically and clearly numbered, so all you need to do is place them in rows and columns.

So, back to Jenny in a sari. I love using saris for many of my clothes: the fabric drapes so nicely! And the colours! and the metallic thread borders! Having said that, this sari is black with pewter and copper metallic thread borders.

The sailor suit consists of a short-sleeved top complete with little square scarf thing at the back that ties at the front and a pair of trousers. The very attractive design component of this suit is how the top is yoked at the front. It has a pretty swooping curve. The pants are straight.

I started with the top as it is more *involved*. I prefer to do the difficult thing first. Once again this pattern is in three sizes. I cut everything in the large size, for added comfort. There are two small darts on the blouse. The sleeves also have darts or pleats at the shoulder which give them a slight puff. The ’40s’ puff!!

The instructions are clear and precise and assembly went well. Here are the things I changed though, customizing it to my preferences. First: I lengthened the top. In the pattern picture, it is a short blouse which just covers the trouser top. As I am a *certain* age, I prefer my dressier tops to be tunic length: ending about 2/3 way up my thigh. This entailed widening the hemline by simply lengthening the sidelines a little and I chose to make a slit on either side for more comfort.

I also wanted my sleeves to be full length. But they can be rolled very flat for times I might want it shorter because I made them straight down.

Same as for Veronica, I omitted the side seam zipper. I just didn’t feel there was a need for it, for me, and besides, I don’t like the feel of a zipper on the side there. It stiffens the fabric when using a soft one like sari material. The last change I made was to keep the scarf thing apart from the blouse, rather than sewing it to the neck edge. The instructions guide you through using a bias tape (made from the same fabric and for which a pattern piece is supplied) to finish the neckline. I still used the bias tape. I added one thing: because I was using a sari with a beautiful border, I wanted some of that around the neckline. I had to place it correctly in line with the edges of the neckline and make it stop at the top of the border that was part of the yoke. See picture.

  

The pants are only four pieces. I widened the pants, to really take advantage of the border; in addition, I like wearing skirts in summer but I find them inconvenient at times. So lately I have been making pants wide at the bottom and which are fitted at the top and they look like skirts (or Palazzo pants) because I almost always use soft and flowing fabrics. Comfort and elegance all wrapped in one, if I do say so myself! 🙂

There is no waistband but an inside facing that helps keep things tidy and flat. They have a side zipper and because I liked the fitted look of these, I did use a zipper rather than my usual elastic waist. The well-written instructions guide you through that installation smoothly. There are two small darts on the trouser back pieces which make it lie completely flat to your rear end.

The last thing I did was make a narrow casing with the facings and the pants in the back. Here’s how: after attaching the facings to the pant top, I tacked down the facings at all the seams and then sewed across the back, from side seam to side seam, about 1/2 in. down from the top. Then I slid the elastic in there, sewing it down on either side seam. I cut my clothing slightly bigger than I actually need for comfort. Sometimes that makes the pants droop. So by putting that narrow little elastic in the back, it holds the trousers up snugly at your waist(or wherever) and makes the front look taught and smooth, without bunching the back at all. There is more space around the middle and bum for sitting in that way too. This *flatness* is also necessary when wearing a lightweight fabric top. The tunic shows no bunches or anything when you are wearing it. Of course in the picture it is slightly gathered: cut the elastic just long enough for it to stretch gently and it will then lie flat on you.

 

This pattern has extra long legs because Lorna offers the option (with instructions) of making cuffed pants as was stylish in the 1940s, even for women. Again, I wanted the sari border to be the decoration at the bottom, so I cut the pants to my usual length. Placing the pattern pieces correctly on your borders is crucial: I lined up the pattern grainline on the cross-grain(that is the weft of the fabric, as opposed to the grain which is on the warp. They cross at 90 degrees.) in order to get the border at the bottom.  Come to think of it, that’s what I did for the sleeves too: put the sleeve hem on the border and the cross-grain of the fabric became the grainline on the pattern.

As the end of assembly was nearing, I realized that this outfit would be a very appropriate evening ensemble, not very formal but *nice*. I also saw that it looked a lot like an Indian set, of course, because I used the sari and it’s embellished borders to the max! The last thing I made was a wrap with the last bits of the sari and I can use that on cooler nights.

So in the end, I made Veronica the evening gown into a day dress and Jenny the day outfit into an evening set. Twas ever thus! While discussing the changes I made with Lorna, she pointed out that the original pattern called for a tunic length top, but that *the hipsters thought it would be better shorter*, so she made a short top for this pattern. I simply returned the pattern to its original design!

  
   

Moving to the ’40s.

 Hello! I’m back! With the end of the 1912 Project came a temporary stop to my blogging. Not that I haven’t done anything since then!! I will write about some of those sewing projects later: *The Spirit of Hallowe’en* was one, complete with top hat and gown. There were a couple of wedding gowns… and I made a fall coat to match the Skants I posted about, as well as a three-piece set of dress, skirt and bolero made from a delightful insect print heavy cotton, amongst the more interesting projects… There were some textile-but-not-sewing projects done too. I made a few embroidered leather bags and other accessories as well as a few hats (including a top hat) for the Geek Market I had a booth in last October. Oh dear, I have just realized I have a lot to catch up on!

Through the 1912 Project I met many ladies from all over the world. Many own and run their own clothing/costuming, millinery, wig making or footwear businesses. One that caught my eye was Lorna McKenzie’s *The Tailor’s Apprentice*, out of Sydney, Australia. I followed her travels to England in late summer and wandered about her website. She recently posted asking for testers for her line of 1940s patterns derived from real clothing she received… She tells that story very well on her site: http://www.thetailorsapprentice.com/index.php/patterns/category/miss-page. As I enjoy period costumes and clothes, I volunteered by writing to her saying I would like to give it a whirl! Within that week I received two patterns in digital form, which I printed out very easily, really! I chose the sailor suit named *Jenny* and the evening gown called *Veronica*. There are several more: a wedding dress, a day dress and overalls.

The featured image and the two pictures below are The Tailor’s Apprentice’s pictures of the *Veronica* pattern.

      

Don’t be afraid of digital patterns: they are easy to use and anyway, Lorna gives very clear instructions on how to download, print  and reassemble them. The pages were clearly marked for re-assembly and the patterns are multi-sized too. Lorna includes well described and illustrated instructions to sew up her patterns: see the pictures below. I found them easy to follow and appreciated her personal notes on making it more *period accurate* if you want to.

So here are more thoughts and comments about Veronica, the evening gown with cape. I chose to sew that one up first because I have a lovely light-weight rayon that came to mind as soon as I saw the pattern on-line. It has a slightly vintage feel to it with its varying sizes of roses in red, yellow and royal blue with green leaves on a white background. I had chosen a similar recent style to use on it, but Lorna’s pattern just hit the mark in interesting details (like a sweetheart neckline and the way the princess line is formed) and of course, the vintage factor. Being a costumer, I always like the more unusual patterns if I am going to use any at all!! It will be perfect for evening wear to take on our little holiday in southern climes in January.

This pattern is for a *proper/formal* evening gown: it is to the ground and includes a separate short capelet. I don’t need a formal gown right now, I want a more casual dress, so I cut it to mid-calf, following the indications of where to shorten it printed on the pattern. The photographs below show the *shorten line* and then how I fold the sides to make cutting easier. I made the capelet though, as the gown is sleeveless and I tend to get cold in the evening, even in summer. This will dress it up perfectly and keep my upper arms protected from the breezes that crop up when the sun goes down.

I love using multi-size patterns, as they can be modified easily at the cutting stage. Shortening the skirt is done mid-way and I like that as I really like wide hems, especially in a flowing fabric like rayon. The heart-shaped neckline is beautiful: the small change I made there was to lengthen and narrow the straps so it would be a little lower and a little less boxy. (Horrors, such a floozy!! hahaha!!)

The unusual, or rather, vintage, detail in the bodice is that the front side pieces don’t go straight up to the armhole: they curve over to the side seam about 4 inches below it. I liked that look.

I made another change as well. The pattern calls for a side closure, which is the way most dresses were done in those years. It makes for a nice centre back piece, undisturbed by a zipper or buttons. If you want to keep the real vintage look, Lorna explains that snaps, hooks or a metal-toothed zipper are best. I prefer to have none, if I can manage getting the dress on without an opening anywhere! So I tried it on after the initial assembling of the dress and it worked. I normally put my dresses on from the top rather than walk into them and pull them up: so very often no zipper is needed to open it up enough to get into it.

The facings were easy to sew on… I always seem to have trouble with that part, but this pattern worked on the first try! 🙂

Once everything had been put together and properly ironed, I decided to top-stitch all the edges: neckline and armholes. It helps to keep the facings inside and gives it a more casual look.

The capelet is short and flowing, with a turn-over collar. I chose not to line it, but I will fringe it. I am planning to use a 12 in. deep satin fringe trim on it to help it stay on my shoulders better as well as a small clasp from my Treasure Box of vintage buttons and clasps. It may slip off too easily otherwise. I haven’t bought the fringe yet. There are not many colours to choose from at my usual shop: white, red, black, navy or yellow. I am leaning towards the red. I like the punch!

Here are a few pictures of my version of Veronica, in this order: front dress, back dress, front with cape, back with cape. I will post new ones once the fringe is on the capelet.

        

East meets west as they Wrap into one.

Here is another example of the interesting historical patterns which can be found at the VPLL website, offered as part of the VPLL’s 1912 Sewing Project. This is a 1912 fringed lady’s wrap with deep scallops, almost like bat wings! As soon as I came across it, I knew what fabric I wanted to use! I had a remnant from a sari I bought last fall. I made a circle skirt with the body of the sari and kept the pallu: that’s the especially ornate, decorative and patterned end of the sari which is usually thrown over the left shoulder.

I love saris. I was first introduced to them at about 8 years old, when my father befriended someone who worked with him at the CBC who was married to a lovely little Indian lady named Shakuntala. We often shared meals and eventually she gave my sister and me an old pure silk sari in shades of violet and black. It was printed with the perennial paisley design so dear to India. I still have it in my closet!

Anyway… my love affair with saris and most things Indian most assuredly started then.

As I digress nostalgically about saris, I mustn’t forget my present project.

The sari I bought last fall had bright colours: red, yellow and blue-green melding into each other and a Jacquard pattern woven into it which reminded my husband of fish scales. He thought it would be a good base for a Hallowe’en costume, as we had been invited to a party and I was still looking for a good costume to make. The blue-jade ran down the centre of the sari and as soon as he said that, I saw a siren’s tail… That will be the subject of another blog one day… So the sari was bought and quickly transformed into a skirt (see the second picture: that’s the circle skirt hanging to stretch before hemming it) which would become part of *Sedna*.

 

And there I go again! I was saying that I knew immediately upon seeing the pattern that I would use this remnant. The pallu is mostly red and yellow with dashes of blue-green and I was a little worried it wouldn’t be big enough to accommodate the wrap… but I was wrong. There was plenty! There was even enough to cut the tie linings but not enough to line the main body of the wrap.

 

I STILL have smaller bits which are folded away now that will undoubtedly be used as accents somewhere. They are packed away with several other saris awaiting their turn for use! And there I go again… It must be because I am in a very quiet house tonight: everyone is away at work or chumming with old friends. I can actually think, compose and write as well as savour my wine at the computer without guilt and without interruption!

The wrap pattern consists of only 3 pieces: two different length ties and the wrap itself. While I was placing the pattern on the fabric I was wondering what I would use as a fringe. I have several lengths of satin fringe, but most of them are black… I didn’t want that kind of contrast. The instructions also called for a lining. I did cut one out of bright red lining although I wasn’t certain I would want it. I thought it would be a convenient cover to hide the fringe band if I used a fringe.

I stay-stitched all around the wrap as it has scalloped edges and they tend to stretch even with *ordinary* fabric. But sari fabric is often rather loosely woven. This one is especially. So, to prevent too much distortion and stretching I stay-stitched.

My search amongst my treasures turned nothing up at first… So I went ahead and started sewing the ties to their linings. As I strolled over to my ironing board to press them I caught sight of a piece of beaded fringe a special friend gave me. I used to make belly dance and tribal costumes (for others as well as myself) and this is left over from those days! The fringe is gold, red and green. The gold was a perfect match for some of the yellow shading in the sari and the red and the green just worked too! There is a pattern within the fringe: red roses with a green leaf on either side. A 4” glass beaded fringe is a little heavy, but it doesn’t matter much to me. I figured it would help keep the wrap nicely pulled down to show the beautiful woven as well and dyed patterns in the fabric. Best of all: the fringe is beaded onto a yellow ribbon. I measured it and it was as if it had been cut especially for this project! Perfect fit!

So I carefully sewed the fringe on to the edge of the wrap with a zipper foot, still thinking I would line it. I actually did sew most of the lining to it as well, afterwards. But it felt wrong. I stopped sewing and took the lining off. I decided to use the yellow ribbon as the cache for the cut edge. I turned in the seam allowance under the ribbon and sewed the ribbon down over it. A very clean finish! After some consideration, I decided to sew a  narrow red satin ribbon on the right side of the wrap. It seemed to need it.

The ties could have a pleat or not. I chose to simply sew them flat to the wrap ends, as I intend to use them to tie around the waist at times… Easily done! I carefully top-stitched the ties on and there you are! The wrap was done swiftly. If it hadn’t been for the search for the fringe, it would have been done in an afternoon. This is an easy project for beginners and pros alike!

The best part of this is: I can use the wrap as a shawl, as it is intended to be, or as a hip scarf over the matching skirt! I don’t *dance* much anymore but I love my bright colours in summer and this certainly fits THAT bill! I will wear the skirt and wrap with a solid coloured t-shirt and it will look just dandy!

     

Passion for the Fashion, part II: The Accessories.

 

My first post about the 1912 Afternoon Wrap from the VPLL website Titanic Sewing Project talked about how I came about making the wrap. This post is about how I dressed it up a little to be able to wear it at the Titanic Dinner we are going to at the Fairmont Chateau Laurier here in Ottawa. The Chateau is commemorating the Titanic disaster because the man responsible for its existence, Mr. Charles M. Hays, was supposed to be at the opening ceremonies but he died on the Titanic on his way back from London, England. They had to postpone the special ceremonies for over a month.

My husband surprised me on Thursday morning with reservations for the Titanic Dinner! The dinner is on Sunday evening! What to wear? what to wear? Not in a panic but simply which hat shall I wear? I recently made quite a few 1912 or thereabouts hats. What outfit? I wanted to wear my newly made Easter hat and a matching gown I would make that day but after consulting with the Ladies from the 1912 Titanic Sewing Project on Facebook, I realized that hat is simply not right for a dinner. It is an afternoon hat or a luncheon hat… NOT a dinner hat. A hair ornament with feathers and or ribbon and or tulle and any mix of the previously mentioned would be better.

So I set out in search, again, for suitable materials to make the hair ornament. I picked out some antique metallic lace, a couple of brooches, feathers and of course a comb, as this ornament should sit in some kind of *updo*. There were many types of feathers and I decided on peacock after observing that certain feathers have more blue which perfectly matched the blue of the Afternoon Wrap and its skirt. The skirt I already made about 4 years ago and is a very long and full flowing skirt.

 

 

In order to hide some of the discoloration of the metallic thread and also because I wanted to narrow down the piece of lace to fit my wide comb comfortably, I folded over the two ends and sewed them tightly into a strong support for the feathers and brooch I intended to add to it. It looked lovely but didn’t show up very well. 😦 So I added a piece of the blue satin behind the lace and sewed them together at the edges and a little throughout the lace to make it sit flat. After that I sewed on the brooch which I assembled from 3 brooches: I found two very small pins with blue rhinestones that were the right match for the blue and the gold was a good match for the gold on the pendant pin. The bigger brooch has a large drop pearl dangling from it. It appealed to me!

Once the brooch was solidly attached to the lace/fabric background it was time to add the feathers. Many ideas were considered…. and after a long while I chose 5 peacock feather *eyes* and use the stem of a very long plume without its ornate end to have some cascading long *stalks* floating behind the smaller and lower row of *eyes*. Steaming the feathers after arranging them makes them stick together properly again. My comb was finished by the end of Thursday and met with many of the Ladies’ approval.

All evening though, I kept on thinking that although the outfit looks very nice, it isn’t really appropriately *evening* in spite of it being satin. The main problem with it is that the skirt is so much fuller than what would have been worn in 1912. I didn’t have enough matching fabric to make a new narrow skirt nor was there anything in my stash that looked right with it. Besides, I like the butterfly border on the skirt: it obviously works well with the same border used as a belt and the back design for the Wrap!

I also had a handbag on my mind… I didn’t have anything in the right colours to use for a period dinner… I went to bed deciding that I would embroider a butterfly on a remnant of the blue satin and make a small clutch with it.

The plan was in my head, I was able to get to sleep! hahaha!!

My morning on Friday was busy with serious appointments and visits… I had to wait for the afternoon to get back to my outfitting!!!  I set upon the embroidery work and by the end of the day I had two panels of embroidered fabric ready to make into a bag. Even though this is machine embroidery, it takes several hours to get two embroideries of this size done. I embroidered a butterfly design which is almost the same butterfly as on the fabric’s border on one panel, using the wrong gold side of the fabric as its background, and a moth with a sunset scene in its wings for the other panel. The embroideries were done with a layer of quilt batting under the fabric: it gave the small bag extra texture.

Satisfied with that work, I found a zipper (Horrors!! They had no zippers in 1912!! But as I had no fancy bronze clasp and neither did I want to make a flap which would have covered the embroidered insects I went for the next easiest thing to do: a zipper.) and left that day’s work at that.

I went to bed still looking for a way to make my inappropriately wide and full skirt into a straight, evening look skirt. Cutting it down to narrow it was out of the question. The other secret about this skirt is that it is actually a pair of very wide pants. My mother had something like this in the seventies. They called them :*Palazzo* pants. Do you remember that?

First thing I did Saturday morning was finish assembling the clutch. I sewed some of the beaded trim in the bottom curve of the bag and this made it shine!

 

But what about the skirt? I knew that I should have some kind of sheer and straight front panel. At least that is what I preferred in the look of the many dinner and evening dresses I have looked at from that era! Having a panel like this would partially hide the full skirt. It could hang either horizontally across or diagonally. Either way it would have to be placed so that the butterfly border could be seen. Last night I went in search of fabrics in my treasury… there was nothing that caught my eye. I went to bed feeling a little disappointed.

After breakfast this morning, back down to the studio I went because overnight I remembered that I have a box of organzas and other sheer bits that I forgot to check yesterday!

No royal blue. 😦 No gold. 😦 Right at the bottom there was an oddly shaped piece of navy blue organza!! Rather scrunched. But upon opening it up, and checking it against myself, I established that not only was there enough but that the diagonal piece it was cut into would be the perfect shape for my *tabbard* of sorts!! I immediately decided that I would add the last of the blue beaded trim I made for the Wrap if there was enough of it… what else can I do? What else? What else would be the last touch??????

There was enough beaded trim. YES! 🙂 And after checking to see if there was enough of that: I cut the last bits of the butterfly border off the remnants and although not quite enough to extend the full length of the hem, I sewed it on to the organza. I will drape and pin to properly settle everything when I get dressed tonight.

        

Since the seam between the organza and the satin would show anyway, I sewed over it with gold metallic embroidery thread that matched the gold of the fabric. (I have 10 different shades of metallic gold in my threads!!!) This gave it extra dash. Then I sewed the beaded trim to the very edge of the butterfly border. The weight of the beads pulls the overskirt down and prevents it from flying up due to static or other sources. This piece of fabric will wrap over the skirt, creating a flat narrow look and matching the outfit for a proper ensemble look!!! And I still have my wide skirt for summer time!!!

I will post pictures of me wearing this outfit later on tonight or tomorrow!!

Passion for the Fashion!

 

Life has been rather hectic since my last post. Lots going on at home and everywhere else!

I received our Titanic Sewing Group’s first pattern last week on Thursday. 1912 Afternoon Wrap, pattern # 0291, from La Mode Illustree, found on the VPLL’s website. First thing I did was go to my private stash and rummage through that until I fell upon a remnant from a  skirt/pant I made 3 or 4 summers ago from a lovely royal blue Jacquard light weight satin which goes to navy on both selvedges and within that darker part is a gold woven pattern of butterflies and scrolling. So the wrong side of this is just as beautiful as the right side… This explains why I chose to make the Afternoon Wrap without a lining. The flashes of gold add an interesting dimension to the outfit!

Same as for the Challenge Pattern (the Princess Slip from my previous blog), I printed the pattern from a .PDF and reassembling it was easy. We were provided with a cutting layout and I saw that it showed cutting the two main and the four collar pieces separately on a single layer of fabric and realized that they had been placed incorrectly. Another Lady in our group brought that up yesterday… before I had a chance to report on it. I passed over that as I intended to cut these pieces on a folded piece of fabric, that way only cutting one large main piece and two collar pieces. As long as either the two right or two wrong sides are touching, the pieces get cut correctly, that is: mirror-image of each other and you are ready to assemble them.

I stay-stitched all the pieces. It means a lot of work removing some of that later, but prevents the pieces from changing size as many of the edges are on the bias or other than straight grain of the fabric.

There were two darts indicated on the main piece. One for the shoulder and one for the bust. After measuring the distance from the shoulder dart to that bust-line dart, I decided to lower that dart a little and extend it too. It was too high to lie where it should when I am wearing my *regular* bra. It would have been fine if I wore a push-up bra… These things always come into play, right? They do make a difference on some of us hahaha!! 🙂

Another change I made was to lengthen the back and front parts because again, after measuring, I saw that the hem line would lie across my widest part, and I don’t particularly want to put a spotlight on it… (I must confess that lately, I prefer to wear slightly longer t-shirts, vests, sweaters and jackets for that reason too.) As I was cutting the pieces out I was thinking of the trims and other decorations I wanted to use. The pattern called for making a belt and adding tassels to the sleeve points. As I didn’t have any ready-made tassels but did have a bit of matching dark blue satin fringing, I chose to make the tassels with that and embellish the tassels with beads. I have been beading for years as well and to put it mildly, I have beads in many colours, textures and sizes and shapes. (Being a sewer for the last 40 years, and a collector of *bits*, I have a large selection of many things to use when I don’t have exactly what is required.) Depending on how much fabric border would be left over, it would be used to make the belt. If too short, I would make a buckled belt as suggested but I was hoping it would be long enough to make a tied belt that would have long hanging ties.

 

 Tassels sewn to the point by rolling the hems over the crown of the tassel.

I wanted to spotlight that lovely border as much as possible, so turned the pattern piece 90 degrees making the centre back sit along the selvedge and the butterflies would be going up and down my back, rather than across it and the front pieces. The instructions included adding an optional band on the sleeve edge. Rather than add another layer of fabric to the sleeve edge, I decided to turn up the hem using the gold wrong side outside at the hem which added only a narrow detail instead of the wide one suggested.

  You can see the wrong-side-turned-out hem and the point which is covered with the selvedge border.

As I looked at the sleeve, it occurred to me that if it was going to have a nice gold edge, it should also have more decorative points. After cutting enough border for the belt, I found that I still had enough border length to cut four points from it and add them to the points of the sleeves. It gave the points the same fade from dark blue to the royal blue as the hem had and would decorate the points a little more than having just the tassels hang from them. This was also good for adding some weight to the points because the fabric was so light. Clean finishing the top of the triangle and sewing it to the end point was a quick job. When I turned the hem there, the two layers here turned over together to make a stiff heavier point which would be stronger to support the beaded tassels.

 On the left you can see the one point still pinned in and the second point has been sewn across its top to clean finish the new triangle.

  This is what it looked like before turning the hem.

Here are two of the sleeve points finished but before having added the tassels.

I made the pleats and sewed the darts first making sure everything was lying in the right spot with each piece. Then assembled the two main body pieces by sewing the centre back seam, as per instructions. The collar was equally easy to assemble and add to the wrap. Pictured at left below is the front pleat on right half bodice at waist line. The next picture shows the pleat on back bodice.

  

Using the border for the belt made a rather ornate belt. That was another reason for not using the order butterflies on the collar lapels.  I simply turned the two edges of the belt length under using the rolled-hem foot on my machine. Below is the wrong side of the belt piece.

 

I wanted to see the wrong side of the fabric too, in order to use the gold flashes that would appear as I moved. I didn’t want to use a buckle: that’s when I decided to make two more tassels for the belt ends. I shaped the square ends of the belt into triangles and sewed the tassels to the points of the belt, reflecting the sleeve points. The belt was then sewed to the middle back seam at its middle and everything was pressed once more. After beading the tassels, I made a beaded fringe with the blue beads which I then sewed to the front and back hems of the wrap. This all made it a little more formal than may have been used for an *Afternoon* wrap in 1912 but I may only use the wrap with the skirt on cooler evenings in the summer. I don’t wear that pant/skirt in winter! The very next two pictures show you the beaded fringe on front and back. The bottom pictures are front and back views of the entire outfit with the long-ago made skirt.

  

  

Now that it is done, I feel the slashed points of the sleeves near the bodice front need re-enforcing. So I will be adding a self bias strip stretching 3 in on either side of the opening.

And… I am pretty sure I will make this wrap in the same fabric used for the Princess Slip made to be a nightgown two weeks ago. Again, I will lengthen the front and back pieces and I will use the same lace as the gown for the sleeve edges. Instead of a belt, I will use buttons. It will be lighter than a bathrobe and give the nighty some extra *modesty* when not in bed, heheh!!