Passion for the Fashion, part II: The Accessories.

 

My first post about the 1912 Afternoon Wrap from the VPLL website Titanic Sewing Project talked about how I came about making the wrap. This post is about how I dressed it up a little to be able to wear it at the Titanic Dinner we are going to at the Fairmont Chateau Laurier here in Ottawa. The Chateau is commemorating the Titanic disaster because the man responsible for its existence, Mr. Charles M. Hays, was supposed to be at the opening ceremonies but he died on the Titanic on his way back from London, England. They had to postpone the special ceremonies for over a month.

My husband surprised me on Thursday morning with reservations for the Titanic Dinner! The dinner is on Sunday evening! What to wear? what to wear? Not in a panic but simply which hat shall I wear? I recently made quite a few 1912 or thereabouts hats. What outfit? I wanted to wear my newly made Easter hat and a matching gown I would make that day but after consulting with the Ladies from the 1912 Titanic Sewing Project on Facebook, I realized that hat is simply not right for a dinner. It is an afternoon hat or a luncheon hat… NOT a dinner hat. A hair ornament with feathers and or ribbon and or tulle and any mix of the previously mentioned would be better.

So I set out in search, again, for suitable materials to make the hair ornament. I picked out some antique metallic lace, a couple of brooches, feathers and of course a comb, as this ornament should sit in some kind of *updo*. There were many types of feathers and I decided on peacock after observing that certain feathers have more blue which perfectly matched the blue of the Afternoon Wrap and its skirt. The skirt I already made about 4 years ago and is a very long and full flowing skirt.

 

 

In order to hide some of the discoloration of the metallic thread and also because I wanted to narrow down the piece of lace to fit my wide comb comfortably, I folded over the two ends and sewed them tightly into a strong support for the feathers and brooch I intended to add to it. It looked lovely but didn’t show up very well. 😦 So I added a piece of the blue satin behind the lace and sewed them together at the edges and a little throughout the lace to make it sit flat. After that I sewed on the brooch which I assembled from 3 brooches: I found two very small pins with blue rhinestones that were the right match for the blue and the gold was a good match for the gold on the pendant pin. The bigger brooch has a large drop pearl dangling from it. It appealed to me!

Once the brooch was solidly attached to the lace/fabric background it was time to add the feathers. Many ideas were considered…. and after a long while I chose 5 peacock feather *eyes* and use the stem of a very long plume without its ornate end to have some cascading long *stalks* floating behind the smaller and lower row of *eyes*. Steaming the feathers after arranging them makes them stick together properly again. My comb was finished by the end of Thursday and met with many of the Ladies’ approval.

All evening though, I kept on thinking that although the outfit looks very nice, it isn’t really appropriately *evening* in spite of it being satin. The main problem with it is that the skirt is so much fuller than what would have been worn in 1912. I didn’t have enough matching fabric to make a new narrow skirt nor was there anything in my stash that looked right with it. Besides, I like the butterfly border on the skirt: it obviously works well with the same border used as a belt and the back design for the Wrap!

I also had a handbag on my mind… I didn’t have anything in the right colours to use for a period dinner… I went to bed deciding that I would embroider a butterfly on a remnant of the blue satin and make a small clutch with it.

The plan was in my head, I was able to get to sleep! hahaha!!

My morning on Friday was busy with serious appointments and visits… I had to wait for the afternoon to get back to my outfitting!!!  I set upon the embroidery work and by the end of the day I had two panels of embroidered fabric ready to make into a bag. Even though this is machine embroidery, it takes several hours to get two embroideries of this size done. I embroidered a butterfly design which is almost the same butterfly as on the fabric’s border on one panel, using the wrong gold side of the fabric as its background, and a moth with a sunset scene in its wings for the other panel. The embroideries were done with a layer of quilt batting under the fabric: it gave the small bag extra texture.

Satisfied with that work, I found a zipper (Horrors!! They had no zippers in 1912!! But as I had no fancy bronze clasp and neither did I want to make a flap which would have covered the embroidered insects I went for the next easiest thing to do: a zipper.) and left that day’s work at that.

I went to bed still looking for a way to make my inappropriately wide and full skirt into a straight, evening look skirt. Cutting it down to narrow it was out of the question. The other secret about this skirt is that it is actually a pair of very wide pants. My mother had something like this in the seventies. They called them :*Palazzo* pants. Do you remember that?

First thing I did Saturday morning was finish assembling the clutch. I sewed some of the beaded trim in the bottom curve of the bag and this made it shine!

 

But what about the skirt? I knew that I should have some kind of sheer and straight front panel. At least that is what I preferred in the look of the many dinner and evening dresses I have looked at from that era! Having a panel like this would partially hide the full skirt. It could hang either horizontally across or diagonally. Either way it would have to be placed so that the butterfly border could be seen. Last night I went in search of fabrics in my treasury… there was nothing that caught my eye. I went to bed feeling a little disappointed.

After breakfast this morning, back down to the studio I went because overnight I remembered that I have a box of organzas and other sheer bits that I forgot to check yesterday!

No royal blue. 😦 No gold. 😦 Right at the bottom there was an oddly shaped piece of navy blue organza!! Rather scrunched. But upon opening it up, and checking it against myself, I established that not only was there enough but that the diagonal piece it was cut into would be the perfect shape for my *tabbard* of sorts!! I immediately decided that I would add the last of the blue beaded trim I made for the Wrap if there was enough of it… what else can I do? What else? What else would be the last touch??????

There was enough beaded trim. YES! 🙂 And after checking to see if there was enough of that: I cut the last bits of the butterfly border off the remnants and although not quite enough to extend the full length of the hem, I sewed it on to the organza. I will drape and pin to properly settle everything when I get dressed tonight.

        

Since the seam between the organza and the satin would show anyway, I sewed over it with gold metallic embroidery thread that matched the gold of the fabric. (I have 10 different shades of metallic gold in my threads!!!) This gave it extra dash. Then I sewed the beaded trim to the very edge of the butterfly border. The weight of the beads pulls the overskirt down and prevents it from flying up due to static or other sources. This piece of fabric will wrap over the skirt, creating a flat narrow look and matching the outfit for a proper ensemble look!!! And I still have my wide skirt for summer time!!!

I will post pictures of me wearing this outfit later on tonight or tomorrow!!

Passion for the Fashion!

 

Life has been rather hectic since my last post. Lots going on at home and everywhere else!

I received our Titanic Sewing Group’s first pattern last week on Thursday. 1912 Afternoon Wrap, pattern # 0291, from La Mode Illustree, found on the VPLL’s website. First thing I did was go to my private stash and rummage through that until I fell upon a remnant from a  skirt/pant I made 3 or 4 summers ago from a lovely royal blue Jacquard light weight satin which goes to navy on both selvedges and within that darker part is a gold woven pattern of butterflies and scrolling. So the wrong side of this is just as beautiful as the right side… This explains why I chose to make the Afternoon Wrap without a lining. The flashes of gold add an interesting dimension to the outfit!

The fabric

Same as for the Challenge Pattern (the Princess Slip from my previous blog), I printed the pattern from a .PDF and reassembling it was easy. We were provided with a cutting layout and I saw that it showed cutting the two main and the four collar pieces separately on a single layer of fabric and realized that they had been placed incorrectly. Another Lady in our group brought that up yesterday… before I had a chance to report on it. I passed over that as I intended to cut these pieces on a folded piece of fabric, that way only cutting one large main piece and two collar pieces. As long as either the two right or two wrong sides are touching, the pieces get cut correctly, that is: mirror-image of each other and you are ready to assemble them.

I stay-stitched all the pieces. It means a lot of work removing some of that later, but prevents the pieces from changing size as many of the edges are on the bias or other than straight grain of the fabric.

There were two darts indicated on the main piece. One for the shoulder and one for the bust. After measuring the distance from the shoulder dart to that bust-line dart, I decided to lower that dart a little and extend it too. It was too high to lie where it should when I am wearing my *regular* bra. It would have been fine if I wore a push-up bra… These things always come into play, right? They do make a difference on some of us hahaha!! 🙂

Another change I made was to lengthen the back and front parts because again, after measuring, I saw that the hem line would lie across my widest part, and I don’t particularly want to put a spotlight on it… (I must confess that lately, I prefer to wear slightly longer t-shirts, vests, sweaters and jackets for that reason too.) As I was cutting the pieces out I was thinking of the trims and other decorations I wanted to use. The pattern called for making a belt and adding tassels to the sleeve points. As I didn’t have any ready-made tassels but did have a bit of matching dark blue satin fringing, I chose to make the tassels with that and embellish the tassels with beads. I have been beading for years as well and to put it mildly, I have beads in many colours, textures and sizes and shapes. (Being a sewer for the last 40 years, and a collector of *bits*, I have a large selection of many things to use when I don’t have exactly what is required.) Depending on how much fabric border would be left over, it would be used to make the belt. If too short, I would make a buckled belt as suggested but I was hoping it would be long enough to make a tied belt that would have long hanging ties.

 

 Tassels sewn to the point by rolling the hems over the crown of the tassel.

I wanted to spotlight that lovely border as much as possible, so turned the pattern piece 90 degrees making the centre back sit along the selvedge and the butterflies would be going up and down my back, rather than across it and the front pieces. The instructions included adding an optional band on the sleeve edge. Rather than add another layer of fabric to the sleeve edge, I decided to turn up the hem using the gold wrong side outside at the hem which added only a narrow detail instead of the wide one suggested.

  You can see the wrong-side-turned-out hem and the point which is covered with the selvedge border.

As I looked at the sleeve, it occurred to me that if it was going to have a nice gold edge, it should also have more decorative points. After cutting enough border for the belt, I found that I still had enough border length to cut four points from it and add them to the points of the sleeves. It gave the points the same fade from dark blue to the royal blue as the hem had and would decorate the points a little more than having just the tassels hang from them. This was also good for adding some weight to the points because the fabric was so light. Clean finishing the top of the triangle and sewing it to the end point was a quick job. When I turned the hem there, the two layers here turned over together to make a stiff heavier point which would be stronger to support the beaded tassels.

 On the left you can see the one point still pinned in and the second point has been sewn across its top to clean finish the new triangle.

  This is what it looked like before turning the hem.

Here are two of the sleeve points finished but before having added the tassels.

I made the pleats and sewed the darts first making sure everything was lying in the right spot with each piece. Then assembled the two main body pieces by sewing the centre back seam, as per instructions. The collar was equally easy to assemble and add to the wrap. Pictured at left below is the front pleat on right half bodice at waist line. The next picture shows the pleat on back bodice.

  

Using the border for the belt made a rather ornate belt. That was another reason for not using the order butterflies on the collar lapels.  I simply turned the two edges of the belt length under using the rolled-hem foot on my machine. Below is the wrong side of the belt piece.

 

I wanted to see the wrong side of the fabric too, in order to use the gold flashes that would appear as I moved. I didn’t want to use a buckle: that’s when I decided to make two more tassels for the belt ends. I shaped the square ends of the belt into triangles and sewed the tassels to the points of the belt, reflecting the sleeve points. The belt was then sewed to the middle back seam at its middle and everything was pressed once more. After beading the tassels, I made a beaded fringe with the blue beads which I then sewed to the front and back hems of the wrap. This all made it a little more formal than may have been used for an *Afternoon* wrap in 1912 but I may only use the wrap with the skirt on cooler evenings in the summer. I don’t wear that pant/skirt in winter! The very next two pictures show you the beaded fringe on front and back. The bottom pictures are front and back views of the entire outfit with the long-ago made skirt.

  

  

Now that it is done, I feel the slashed points of the sleeves near the bodice front need re-enforcing. So I will be adding a self bias strip stretching 3 in on either side of the opening.

And… I am pretty sure I will make this wrap in the same fabric used for the Princess Slip made to be a nightgown two weeks ago. Again, I will lengthen the front and back pieces and I will use the same lace as the gown for the sleeve edges. Instead of a belt, I will use buttons. It will be lighter than a bathrobe and give the nighty some extra *modesty* when not in bed, heheh!!