Hello again! Found my way back here.

   It’s winter again. Today is Tuesday, and we have received over one foot of snow so far, at 14:00 hrs. Not a record-breaking amount, but a lot for us, since we had a completely green Christmas. I was actually gardening on Christmas day, in a t-shirt!!!

Last week ended with a deep freeze, so deep we lost the mercury on our thermometer. The coldest this thermometer drops to is -30 C. It has crept back up a little, only to land us in a very real snow storm. Not a  raging, windy, howling and blustering storm. Only a constant, heavy fall of rather fine flakes, collecting on our window sills and everywhere else, high enough to prevent seeing out, is what we woke up to today. I dug out the seeds and other treats we put out for the birds and squirrels, but it got re-buried within 30 minutes. The crows are cawing and chatting… We are privileged to host 5 crows almost every day,  at our feeding station!!!

But I am not here to talk about the birds or animals or the weather! I got rather busy last year with many projects. Some from the local Super Heroes group, others from the 501st, weddings and proms and finally quite a few personal things, such as my first ever, absolutely (looking) accurate Tudor gown and other costumes needed for our first visit to a Renaissance Fair in the U.S.A. My own Tudor outfit took very close to 300 hours. There was a lot of hand embroidery, as well as free-motion machine hand-controlled embroidery, beading and hand-couching and a lot of hand sewing to get it all together.

It looks like I am slipping into talking about that project, rather than talking about my K-Coats (which are what I intended to discuss!!!!!!). I also started making K-Coats last year.  In fact I produced 34 of them!!! Some were commissioned, most were just coats I HAD to make!!! That was what I thought to write about today. So which shall it be?

I think that now that I have started, I will continue with the Tudor outfit. I am very proud of it. Since it takes a lot of room in the closet, Justin suggested we keep My Lady on her mannequin, in the living room, near the fireplace. A permanent exhibit of what I consider to be the apotheosis of my *making* career. I wore it only 4 hours. Maybe even not quite.

tudorblogg (1)

Our Tudor couple.

The whole RenFair experience was new to us. We were invited to join my friend and her husband at the Bristol, WI. Renaissance Fair. Then I invited another friend to come and she brought one daughter and a niece too!!! The Bristol Faire is considered to be the *best* RenFair in the country. Their time-frame is late Elizabethan. I chose late Tudor as our era for our costumes.

Our first look at the Entrance to Bristol Renaissance Faire!!

Our first look at the Entrance to Bristol Renaissance Faire!!

I could go into the whole story of how and why Tudor times have always been my favourite era in history. I think I may have touched upon that in a past entry of my blogging. If I haven’t, I will come back to that, later here, or in another blog.

There is so much goes into making a costume (or any piece of *meaningful* clothing). Especially for me. THIS Tudor costume has been decades in the desiring, thinking, preparing, envisioning, designing etc. and also collecting of fabrics and trims, embroideries, beads, gems and buttons. My use of burgundy for it is not surprising at all. In fact, burgundy has been a favourite of mine all my life, probably because of my love for Tudor costuming. I used silk for the outer, final layer of the garb. I made a pair of stays two years ago… in hope that one day they would be used within their proper context. I made the stays to go to the 5th Anniversary of the Ottawa Steampunk group’s gala. I was thinking ahead. There was a chance that I would be going to a RenFair in the next couple of years, so my corset for the Steampunk Gala was actually a Pair of Stays.

My reversible pair of stays.

My reversible pair of stays. Note the blackwork embroidery at neckline and sleeve hems. All the ridges seen here smooth out very flat once I am wearing it.

I made the stays, with all their boning, and the outside layers in two silks: a red one, with black sketches of roses, for the inside and a pale blue heavier brocaded silk (bought in Shanghai!! The Mecca of silks!!!) for the outer layer. In fact, the stays were made to be reversible. So I could wear them red, or blue. I cheated in the end. I have made many corsets and gowns requiring lacing up at the back. I have worn many myself. This time, I decided, I would use a zipper (OOOOARGH!!! OH!!!! SHAME!!!) to make it easier to get on, if I had to do it alone. At the Fair, my friend pointed out that if I had put lacing on them, I could have reduced my silhouette by several inches. Perhaps. Yes, perhaps. But, (when I first made them), I wanted to be relatively comfortable… and Tudor stays, in any case, were not made to reduce the size of the wearer. They were made to force the body’s shape cylindrical. Not curvaceous. No emphasis on the chest size (eyebrows raising in a knowing way). In fact, the stays rather flatten the bust: they push it up, but do not reconfigure it. I didn’t really mind that I could have been 5 inches smaller. I was glad, actually, in the end, that the stays straightened and helped support my back, without forcing me smaller. It was a very hot and humid day (31C) in Bristol when I wore My Lady Tudor. I stayed in the shade most of the day… The first 2 hours were a rather precarious time, when I relied on my cane for stability and I was really fighting fainting from the heat… then I got used to it all, and spent another two hours parading about as if I had been born to that clothing!!!

My Lady Tudor is based on three or four paintings I finally chose to help design this gown.

elizabeth1546

janeseymour  bookcover

I was determined to make it as accurate as can be. Some parts were made to *look* perfect. I didn’t make a separate placard. I made the bodice all in one, with folds in the fabric in strategic places, to make it look like there was a separate placard and I sewed on brass pin heads in the right places. In Tudor times, they preferred to cover the lacing up part, which was at the front, unlike the Victorians’ dresses and corsets, and they covered this lumpiness with a placard. Enhancing and further shaping the body into a cylinder. Not a shapely (eyebrows raising up and down) bosomed bodice. The bosom was pushed up. Some RenFair girls wear their stays WAY too tight (I felt) to REALLY do that push-up thing. I actually asked one or two of them in Bristol if it was painful having your breasts pushed up so high, you could rest your chin on them….. Apparently, it is not uncomfortable.

I digress again. Such is my mind. Wandering and remembering and commenting! The three paintings I used as reference guides were: the cover of the book which gave me the instructions and guidelines of all the parts I needed for the costume. This book is: *Creating Historical Clothes*. The painting is of a 16 year-old *woman* in 1565. I also used the painting of Princess Elizabeth, at age 13 or 14 (1546). Then there was a painting of Queen Katherin Parr, the one who out-lived King Henry VIII. But at the time of the painting she was simply a*Lady*, wife of Lord Latimer, but the depiction of her clothing was very instructional. Another painting which had good details and inspiration, was one of Queen Jane Seymour: the one who died of childbirth and is renowned to be Henry VIII’s *favourite* wife. Favourite only because she is the only one who bore him a son who survived early childhood… But that is a whole other story and subject to many thoughts of mine…. Not needed here!

All these dresses were red to burgundy, by the way! I got jewellery details and sewing details from all these paintings.

I looked for more books and more information… I eventually based all the details on these paintings and made what I hoped were correctly looking historical parts. When I strayed from *CORRECT*, it was only so I could get into this clothing on by myself. With very little help if required. That’s why the placard is included in the bodice’s  design. Just one piece, yet it looks like two or more. Really. It does!!! I have had a lot of experience making historical clothing easy to make and put on, yet LOOK exactly right. Does not take away from the final costume!!!

There was the blackwork embroidered linen under-chemise. Then the under-skirt, then the *hoop skirt*, then the kirtle (or kyrtle), in two parts in my case.  Then finally the over skirt  comprised of the fore skirt, which is the flashy showy part of the skirt which is sewn to the rest of the skirt which is always hidden. The bodice was layered this way: chemise (well embroidered, in blackwork, at neck and sleeve hems), stays, kyrtle top, silk bodice top.

detailsleeve

Close up of the over sleeve with the linen chemise peeking through. Note the blackwork.

As big as I thought my bum roll turned out, it seems I still managed to make it smaller than many I have seen since. It feels cool though!! Then the various skirts and hooped parts. Then, FINALLY, the outer skirt. I found some beautiful burgundy silk at a second-hand shop. It was actually a brand new queen-size duvet cover, silk on BOTH sides, bed skirt and two king size pillow shams. All silk, all clean and new!!!!

The fore skirt had a very good pattern on it, but it needed some more pizazz…. So I over embroidered, free-hand machine embroidery, a good part of the gold in it. As it still needed *more*, I also added gold metallic trim which I decorated further with black satin soutache and eventually pearlized beads in various sizes and larger gemstones to it. This fabric also served as the under sleeves, which had slashes cut into them. The picture below shows the embellishments on the fabric for the over sleeves.

beadingsleeve

This is the main fabric for the fore skirt and the under sleeves. It required quite a bit of extra dazzle.

detailwholesleeve

Here you can see the over sleeve, covered by the over fold, which was couched and beaded as well as black work added to give it more texture.

I made the French Hood too. There were many hours of beading in that!!! I was happy with the end result. I used a pattern for it, and although I reduced the size of it when I cut the first piece, after it was all done, the various layers of cotton and felt added some volume to it. I did sew the ties for it, which go under the neck, to help hold it up, but they drove me crazy in my fittings. So I altered it by adding a hair comb on the inside, to attach it to my hair. That was a good idea: it stayed on my head very comfortably that way and didn’t strangle me, the way the ties had done.

hoodside 20150816_164738

I also made my husband’s costume…. He had a few stipulations though: NO *bubble pants*, it must have matching fabric to mine, no silliness. How does one achieve *NO silliness* when reproducing a historic costume? They wore these clothes with absolute faith that these were what is right. The same way we do with all our trends and fancies today, in the 21st Century1!! And his costume adventures will be the subject of my next blog I think!!

Rose Marie: a 1940’s Wedding or Evening Gown.

RoseMarie2 RoseMarie1 RoseMarie1 - Copy

This is another formal gown, named Rose Marie, by The Tailor’s Apprentice. As usual, I received it as a .pdf downloadable pattern (e-pattern or digitized pattern). This one had more pieces and took much longer to re-assemble but it was well worth my while!

HPIM6898Re-assembling the printed sheets and preparing for cutting.

The pattern allows you to make several outfits: a wedding or evening gown, with or without sleeves, long or short or even with flounced sleeves. You can make it short for day wear, or make it into a two-piece suit, again with a selection of sleeves. I chose a fabric I brought back from a holiday in Curacao. It has a vaguely vintage print on it which I thought suitable for this pattern.

I chose to make a two piece, sleeveless outfit as this fabric is very light cotton and would only be worn in our hot months… and I wasn’t sure there would be quite enough, as it was much narrower than usual. It was the right decision in the end as I had to be a little creative with the top and make a *stepped* front hemline. If you look at the picture of the whole outfit (below), you will see that the center panel of the blouse is a little shorter than the side ones. I didn’t bias hem that piece to prevent *cutting* the visual line across an unflattering width…. 😉

Rose Marie has the typical 1940’s sweetheart neckline which I find so feminine and pretty, especially for summer clothing. As I mentioned, I made it sleeveless. The instructions were very helpful and clear, explaining how to sew up the pattern in true ’40s style, with a side zipper or hooks and eyes or snaps. I opted for a zipper and although I used an invisible zipper, I did follow the instructions to make it hidden under a narrow placket. It does look better that way!

HPIM6907 Bias tape binding both front and back sweetheart necklines.

HPIM8064 The placket over the invisible zipper, on the side of the blouse.

HPIM8066 The bound blouse hemline.

As for the skirt, I chose to make an elasticized waistband (more comfortable and easier to pull on: my fingers have trouble these days with buttons, hooks and snaps even zipper pulls!) with an uneven hemline: the front being a few inches shorter than the back. There are instructions and indications on the pattern for making the skirt as well as for making a separate top.

In order to make an elasticized waistband, I cut the fabric straight up from the waistline, for 3 1/2 inches. That’s double the width of the elastic plus a little to turn under to make the casing. That seam line is sewn right on the waistline. I call this a *self-waistband*: it has no seams (less bulk too) and uses less fabric than making a facing which has to be sewn onto the skirt and then turned under to make the casing. I really had to be frugal with the fabric!!!

I made an uneven hem line because I wanted the skirt to be longer but because I realized in placing the pattern pieces on the fabric that there just wouldn’t be enough of it, I opted to make it shorter at the front and keep the length I wanted for the back.

One of the pictures included in the pattern shows a day suit of blouse and skirt. It shows how the skirt was trimmed with red (bias binding?) at the skirt hem and the same red is on the neckline and sleeve cuffs. I really liked that detail. I was able to find a light blue bias tape, pre-folded, that matched my fabric and so, I finished many edges with it: the curves of the sweetheart neckline both front and back and the lower hem of the blouse as well as the skirt’s hem. The binding adds a little body to the blouse’s hem and I like that effect.

HPIM6906  Pre-folded Bias Tape made hemming easy. It allowed me to have more length on the skirt as I wasn’t folding up a hem.

  HPIM8067  HPIM8065

The front and back views of my version of Rose-Marie.

Sari Sailor Suit

Earlier this week I presented Veronica to you and mentioned Jenny. Jenny is now ready for you.

If you haven’t read my last post, I will explain who they are. Veronica and Jenny are two patterns produced by The Tailor’s Apprentice. Veronica is a 1940’s evening gown with a capelet and Jenny is a sailor suit, also from the 1940s. Lorna McKenzie is the designer and she has used actual clothing from the WWII years to draft these patterns. These were clothes owned by Miss Page. Lorna tells her story on her website. She also has 3 other 1940s patterns at the moment: a wedding dress, a day dress and an overall type thing! There will be more.

It took me a couple of days after downloading the digital patterns from Lorna to decide which fabric from my stash I would use for Jenny. It was a cinch choosing the fabric for Veronica!!! That’s why I started with that pattern. In the end, I chose to use another of my saris to make into the sailor suit. Once it was done, I was amused to observe that I had turned the formal gown Veronica into a day dress and the casual sailor suit into a dressier outfit, as you will see. Asi es la vida!!

By the way, digital patterns are as easy to use as store-bought ones. After receiving your file by e-mail, you print it out and re-assemble it, a bit like a puzzle, and then proceed with cutting the paper up and then cutting your fabric from it. When I say *like a puzzle* it actually is easier than that! All the pattern pieces are logically and clearly numbered, so all you need to do is place them in rows and columns.

So, back to Jenny in a sari. I love using saris for many of my clothes: the fabric drapes so nicely! And the colours! and the metallic thread borders! Having said that, this sari is black with pewter and copper metallic thread borders.

The sailor suit consists of a short-sleeved top complete with little square scarf thing at the back that ties at the front and a pair of trousers. The very attractive design component of this suit is how the top is yoked at the front. It has a pretty swooping curve. The pants are straight.

I started with the top as it is more *involved*. I prefer to do the difficult thing first. Once again this pattern is in three sizes. I cut everything in the large size, for added comfort. There are two small darts on the blouse. The sleeves also have darts or pleats at the shoulder which give them a slight puff. The ’40s’ puff!!

The instructions are clear and precise and assembly went well. Here are the things I changed though, customizing it to my preferences. First: I lengthened the top. In the pattern picture, it is a short blouse which just covers the trouser top. As I am a *certain* age, I prefer my dressier tops to be tunic length: ending about 2/3 way up my thigh. This entailed widening the hemline by simply lengthening the sidelines a little and I chose to make a slit on either side for more comfort.

I also wanted my sleeves to be full length. But they can be rolled very flat for times I might want it shorter because I made them straight down.

Same as for Veronica, I omitted the side seam zipper. I just didn’t feel there was a need for it, for me, and besides, I don’t like the feel of a zipper on the side there. It stiffens the fabric when using a soft one like sari material. The last change I made was to keep the scarf thing apart from the blouse, rather than sewing it to the neck edge. The instructions guide you through using a bias tape (made from the same fabric and for which a pattern piece is supplied) to finish the neckline. I still used the bias tape. I added one thing: because I was using a sari with a beautiful border, I wanted some of that around the neckline. I had to place it correctly in line with the edges of the neckline and make it stop at the top of the border that was part of the yoke. See picture.

  

The pants are only four pieces. I widened the pants, to really take advantage of the border; in addition, I like wearing skirts in summer but I find them inconvenient at times. So lately I have been making pants wide at the bottom and which are fitted at the top and they look like skirts (or Palazzo pants) because I almost always use soft and flowing fabrics. Comfort and elegance all wrapped in one, if I do say so myself! 🙂

There is no waistband but an inside facing that helps keep things tidy and flat. They have a side zipper and because I liked the fitted look of these, I did use a zipper rather than my usual elastic waist. The well-written instructions guide you through that installation smoothly. There are two small darts on the trouser back pieces which make it lie completely flat to your rear end.

The last thing I did was make a narrow casing with the facings and the pants in the back. Here’s how: after attaching the facings to the pant top, I tacked down the facings at all the seams and then sewed across the back, from side seam to side seam, about 1/2 in. down from the top. Then I slid the elastic in there, sewing it down on either side seam. I cut my clothing slightly bigger than I actually need for comfort. Sometimes that makes the pants droop. So by putting that narrow little elastic in the back, it holds the trousers up snugly at your waist(or wherever) and makes the front look taught and smooth, without bunching the back at all. There is more space around the middle and bum for sitting in that way too. This *flatness* is also necessary when wearing a lightweight fabric top. The tunic shows no bunches or anything when you are wearing it. Of course in the picture it is slightly gathered: cut the elastic just long enough for it to stretch gently and it will then lie flat on you.

 

This pattern has extra long legs because Lorna offers the option (with instructions) of making cuffed pants as was stylish in the 1940s, even for women. Again, I wanted the sari border to be the decoration at the bottom, so I cut the pants to my usual length. Placing the pattern pieces correctly on your borders is crucial: I lined up the pattern grainline on the cross-grain(that is the weft of the fabric, as opposed to the grain which is on the warp. They cross at 90 degrees.) in order to get the border at the bottom.  Come to think of it, that’s what I did for the sleeves too: put the sleeve hem on the border and the cross-grain of the fabric became the grainline on the pattern.

As the end of assembly was nearing, I realized that this outfit would be a very appropriate evening ensemble, not very formal but *nice*. I also saw that it looked a lot like an Indian set, of course, because I used the sari and it’s embellished borders to the max! The last thing I made was a wrap with the last bits of the sari and I can use that on cooler nights.

So in the end, I made Veronica the evening gown into a day dress and Jenny the day outfit into an evening set. Twas ever thus! While discussing the changes I made with Lorna, she pointed out that the original pattern called for a tunic length top, but that *the hipsters thought it would be better shorter*, so she made a short top for this pattern. I simply returned the pattern to its original design!

  
   

Moving to the ’40s.

 Hello! I’m back! With the end of the 1912 Project came a temporary stop to my blogging. Not that I haven’t done anything since then!! I will write about some of those sewing projects later: *The Spirit of Hallowe’en* was one, complete with top hat and gown. There were a couple of wedding gowns… and I made a fall coat to match the Skants I posted about, as well as a three-piece set of dress, skirt and bolero made from a delightful insect print heavy cotton, amongst the more interesting projects… There were some textile-but-not-sewing projects done too. I made a few embroidered leather bags and other accessories as well as a few hats (including a top hat) for the Geek Market I had a booth in last October. Oh dear, I have just realized I have a lot to catch up on!

Through the 1912 Project I met many ladies from all over the world. Many own and run their own clothing/costuming, millinery, wig making or footwear businesses. One that caught my eye was Lorna McKenzie’s *The Tailor’s Apprentice*, out of Sydney, Australia. I followed her travels to England in late summer and wandered about her website. She recently posted asking for testers for her line of 1940s patterns derived from real clothing she received… She tells that story very well on her site: http://www.thetailorsapprentice.com/index.php/patterns/category/miss-page. As I enjoy period costumes and clothes, I volunteered by writing to her saying I would like to give it a whirl! Within that week I received two patterns in digital form, which I printed out very easily, really! I chose the sailor suit named *Jenny* and the evening gown called *Veronica*. There are several more: a wedding dress, a day dress and overalls.

The featured image and the two pictures below are The Tailor’s Apprentice’s pictures of the *Veronica* pattern.

      

Don’t be afraid of digital patterns: they are easy to use and anyway, Lorna gives very clear instructions on how to download, print  and reassemble them. The pages were clearly marked for re-assembly and the patterns are multi-sized too. Lorna includes well described and illustrated instructions to sew up her patterns: see the pictures below. I found them easy to follow and appreciated her personal notes on making it more *period accurate* if you want to.

So here are more thoughts and comments about Veronica, the evening gown with cape. I chose to sew that one up first because I have a lovely light-weight rayon that came to mind as soon as I saw the pattern on-line. It has a slightly vintage feel to it with its varying sizes of roses in red, yellow and royal blue with green leaves on a white background. I had chosen a similar recent style to use on it, but Lorna’s pattern just hit the mark in interesting details (like a sweetheart neckline and the way the princess line is formed) and of course, the vintage factor. Being a costumer, I always like the more unusual patterns if I am going to use any at all!! It will be perfect for evening wear to take on our little holiday in southern climes in January.

This pattern is for a *proper/formal* evening gown: it is to the ground and includes a separate short capelet. I don’t need a formal gown right now, I want a more casual dress, so I cut it to mid-calf, following the indications of where to shorten it printed on the pattern. The photographs below show the *shorten line* and then how I fold the sides to make cutting easier. I made the capelet though, as the gown is sleeveless and I tend to get cold in the evening, even in summer. This will dress it up perfectly and keep my upper arms protected from the breezes that crop up when the sun goes down.

I love using multi-size patterns, as they can be modified easily at the cutting stage. Shortening the skirt is done mid-way and I like that as I really like wide hems, especially in a flowing fabric like rayon. The heart-shaped neckline is beautiful: the small change I made there was to lengthen and narrow the straps so it would be a little lower and a little less boxy. (Horrors, such a floozy!! hahaha!!)

The unusual, or rather, vintage, detail in the bodice is that the front side pieces don’t go straight up to the armhole: they curve over to the side seam about 4 inches below it. I liked that look.

I made another change as well. The pattern calls for a side closure, which is the way most dresses were done in those years. It makes for a nice centre back piece, undisturbed by a zipper or buttons. If you want to keep the real vintage look, Lorna explains that snaps, hooks or a metal-toothed zipper are best. I prefer to have none, if I can manage getting the dress on without an opening anywhere! So I tried it on after the initial assembling of the dress and it worked. I normally put my dresses on from the top rather than walk into them and pull them up: so very often no zipper is needed to open it up enough to get into it.

The facings were easy to sew on… I always seem to have trouble with that part, but this pattern worked on the first try! 🙂

Once everything had been put together and properly ironed, I decided to top-stitch all the edges: neckline and armholes. It helps to keep the facings inside and gives it a more casual look.

The capelet is short and flowing, with a turn-over collar. I chose not to line it, but I will fringe it. I am planning to use a 12 in. deep satin fringe trim on it to help it stay on my shoulders better as well as a small clasp from my Treasure Box of vintage buttons and clasps. It may slip off too easily otherwise. I haven’t bought the fringe yet. There are not many colours to choose from at my usual shop: white, red, black, navy or yellow. I am leaning towards the red. I like the punch!

Here are a few pictures of my version of Veronica, in this order: front dress, back dress, front with cape, back with cape. I will post new ones once the fringe is on the capelet.

        

I haven’t been here in almost two weeks! I caught a bad cold, got better then caught a wicked flu that really floored me.  Actually, it bedded me, but that doesn’t really mean the same thing, does it? Fever, complete exhaustion and disinterest in anything have finally given way to getting bored with doing nothing . If I’m feeling bored, that means I’m better so I set to work!

Late last Monday night, Janyce (from the VPLL 1912 Titanic Sewing Project) asked the Ladies: *Who would like to try the Challenge project?*. It was a Princess Slip. As soon as that email got in my box, I wrote back to her volunteering for it. I actually received the pattern, via e-mail in a .PDF format, the next morning and was very excited and pleased so decided to print it out right away. That exhausted me so I went back to bed… after a half hour I decided to re-assemble the 30 pages of print-out into the large sheet containing the 4 pattern pieces: a middle front to be cut on the fold; a side front panel, a middle back and a side back all to be cut twice. It was easy: I figured out that the print-out was 5 across and 6 rows down. The pattern appeared as promised and I set to cutting it out. Then I went back to bed for several days. There is no pattern piece for the pleated flounce at the bottom of the slip as that is just one long, narrow piece of fabric. It requires a lace insert as well, to be done before the pleating.

Over the next few days, I read the excitement on our Facebook group page as the other ladies who volunteered for this *Challenge* project slowly received their own copies and got to work on their slips. I was discouraged as the weekend rolled around and I still hadn’t done anything. Simply too tired to think… but Saturday, I got up and went to search for the fabric and lace I wanted to use for the slip. An hour later I emerged from my workroom, sweating from fever but excited at what I had chosen. My first choice was to take out some white lining and ivory lace. Since I wasn’t ready to sew yet, I left it on the table to mull it over some more.

This past Monday I had to finish another project I wanted out of the way and looked at the fabric for the slip again. I was not happy with that choice anymore. So I went back to my stash of favourite fabrics and pulled it down since it needed straightening out again anyway and chose new fabric. I kept the lace I had first seen.

 Here is the vintage lace showing it’s 3 patterns.

The fabric I used is a crinkled, black flocked black chiffon. The lace is ivory. The narrow ribbon around the neckline is scarlet.

I mentioned that I read most of the posts the other ladies were writing. Many seemed to be having problems with this pattern. Sizing was a universal concern. So I measured the pattern, measured myself and was quite happy to find out that it wouldn’t need any altering, as the measurements of the paper pattern seemed to fit mine exactly! I made two small changes. I narrowed the back between the shoulder blades by about 2 inches and lengthened the straps by about one inch, while cutting the fabric. In the end, I would say that this is an easy to intermediate skill level pattern.

The lace I chose is vintage and 1 3/4″ wide. It is woven in 3 patterns across its width. The pattern required some lace 1″ to be used on the body of the slip and some lace 2″ wide for the neckline and the sleeve openings. I ended up sewing my lace into two 3″ wide segments, to use down the middle front and middle back of the slip. I cut one section off more lace to use down the side seams of both the front and back parts of the pattern. I further cut down the lace to use as a narrow band on the front bodice, to balance out the wider length which I used as the bottom lace insert.

Because this slip will actually be a nightgown for me, I didn’t cut out the fabric from behind the middle lace segments: it was very see-through and very wide… and as one of the Ladies wrote earlier, *I was giving away the ranch*. (What a picturesque expression!!! I like it!!!) I only removed the fabric from the side seam inserts on back and front, and behind the lace that crosses the bodice top.

            

Inserting the lace is a long job but not too difficult. It consists of sewing the lace along the marked spots, turning the piece over, cutting down the middle of the fabric which is now behind the lace, ironing the two flaps to either side of the lace, then sewing down these rolled edges to finish the seam nicely. This process emphasizes the lace if it is the same or a close colour to the fabric it is sewn on. In my case, the lace shows up very well either with or without its fabric backing.

Assembling the front to the back was easy once the lace was inserted. The pattern also called for several buttons to be put down the centre back. Since this is a nighty, I only put one button at the top as I don’t want to be lying on buttons half the night.

The next step is to cut the fabric in one long (about 4 metres) rectangle for the flounce. That was done by ripping it to my chosen width of about 12 inches. I thought to make my flounce out of a black chiffon embroidered in black. I felt it would be softer than the main fabric and would flow better at the bottom. I proceeded with inserting a plainer lace and then to pleat it. The pleats are accordion pleats, with one inch overlapping a two-inch section. This would make the pleats sit without heavy overlapping. It was suggested we read a chapter of this book: “The Art of Manipulating Fabric” by Colette Wolff to learn how to make these pleats. I adapted what I read there to my own needs.

You can see the two lines I marked on the envelope.   Here you can see the two lines I marked for the pleats.
Pressing the fabric over the edge of the envelope at one inch mark.

I took a thick envelope and marked a line one inch from the edge, then made a second mark two inches from the edge. That way the fabric could be folded over the edge of the envelope at the one inch mark and pressed. Then I would align the 2″ line to the (just made) pleat’s edge, weigh it down and bring the fabric over the envelope again and fold it back at the one inch mark. This way the pleats were being kept nice and flat under the paper and not getting ruined or in the way of  making the new pleat. Every 10 or 11 pleats I would press the fabric directly and pin one edge of the fabric to hold the pleats down until all of it had been pleated. Then I basted across the top of the flounce in order to make the pinning of the flounce to the hem of the dress easier.

  This picture shows the pinning of the pleats on one edge.

After the flounce was basted on, I overlayed another piece of the lace and sewed it in three places. This allowed to keep the pleats well flattened and when I wash the garment they will fall back into place much better.

The last thing to add was the red ribbon, woven into the lace at the neckline. I chose the scarlet because it just felt right to me.

 The neckline is emphasized by the scarlet ribbon.

 Front of the finished Princess Slip.

  Back of the finished Slip.

 

A Princess Slip from 1912.

It’s been coming…

Well here I am writing a *blog*… I read only a few blogs myself. Friends’ pages mostly: they write about things i want to know about, or things i already know, interesting things; they are sharing their thoughts which interest me. That’s why they are my friends: they have thoughts that make me laugh or make me think, profoundly or not too much, but I like to read what they have to say. Sometimes I learn new stuff, other times what I read simply reviews or reminds me of older information. Sometimes their stories lead me to other blogs and I will read those as well. I like to keep up with my friends’ discoveries or just their news as we all work in different places and jobs and don’t get together as much as we would like. Especially in winter. I don’t get out much in winter and the reasons why could fill yet another blog! So I will keep that chapter for another day perhaps and try to stay focused on this, my first page of my first blog. With the age of Facebook, I have friends I never met, but we chat and joke and exchange news in written form, through the regular Facebook newsfeed or through private emails or through our blogs. I laugh and cry and sympathize or celebrate with them all the news they care to share. Again, this should be another chapter at another time, I think!

So this blog is about *Sewing the Titanic* or at least, that’s it’s title right? How does one *sew* the Titanic? What is this anyway?

I will not be sewing a ship… although some people may think: *That’s something she is capable of!*. I have made some strange or unusual, unexpected things and I although I wish this project fell into one of those categories, I realize that it won’t!!! What I am embarking on (unintentional pun here… using embarking in a blog about something to do with the Titanic!) is not so unusual, really, not for me as I am an avid costume designer and sewer, nor unexpected since I am a sewer and an avid period/historical costumer… (I will digress briefly here, to mention that I keep on wanting and will have to use the word *SEWER*, but its exact spelling also brings to mind the smelly stinky wet cold sludgy lumpy waters that travel beneath our cities taking the disgusting remnants of our lives away from us and that bothers me. I am a very visual person, and language, whether written or spoken, translates into very vivid images in my head… all the time… and so, I hate some words… or at least, try to use different words when they provoke entirely different images from the ones I am seeking to engender.) I used remnant there… lots of remnants in a sewer’s life… good grief! this will be difficult!! So many plays, images, scenes as I write!

I can see how this could be a protracted blog. Where are all these words coming from? Why am I compelled to explain everything I think, write and see! And since I haven’t received my first installment of the *Sewing the Titanic* project and that I am just introducing this blog, I will get this other stuff off my chest as it were! It reminds me of the film: Julie and Julia too. Discovering everything that wants to be let out is kind of funny…

Writing a themed blog like this one will force me to channel my thoughts and I will try to keep on the straight and narrow of the subject, rather than going everywhere the images thought or written take me. That could be a good thing. Thoughts like: should I even address this idea? Should I explore it MORE or just set it aside for another day? Or just forget it entirely?

It’s funny how life does things… A few days ago I was thinking perhaps I should join the ranks of the blog writers… seems almost everyone is doing it!!! but couldn’t think of anything to say (What me, not knowing what to say??? hahaha!! I know, I know… rare but occasionally true!! hahaha!!) or to tell what would be worth writing or reading about. Then yesterday I came across an ad looking for sewers (that horrible word again!) who would like to participate in the Titanic Project. This year of 2012 is the 100th anniversary of the sinking of the Titanic. It went down in April 1912. I discovered that there are many Societies and Associations and groups with the Titanic theme… and why not? One group in particular, the VPLL (Vintage Pattern Lending Library) is celebrating, for lack of a better word,  maybe *commemorating* would be better, this sad event by recreating the clothing patterns spotlighted in the French publication “La Mode Illustree” of 1912. One of the stipulations for participating was to document my progress with the monthly patterns I will receive both with pictures and entries in a blog at least once a month… I can do that!  So here i am!

Here are pictures of the styles worn that year:

 

All I have to do now… is sit… and wait…