Rose Marie: a 1940’s Wedding or Evening Gown.

RoseMarie2 RoseMarie1 RoseMarie1 - Copy

This is another formal gown, named Rose Marie, by The Tailor’s Apprentice. As usual, I received it as a .pdf downloadable pattern (e-pattern or digitized pattern). This one had more pieces and took much longer to re-assemble but it was well worth my while!

HPIM6898Re-assembling the printed sheets and preparing for cutting.

The pattern allows you to make several outfits: a wedding or evening gown, with or without sleeves, long or short or even with flounced sleeves. You can make it short for day wear, or make it into a two-piece suit, again with a selection of sleeves. I chose a fabric I brought back from a holiday in Curacao. It has a vaguely vintage print on it which I thought suitable for this pattern.

I chose to make a two piece, sleeveless outfit as this fabric is very light cotton and would only be worn in our hot months… and I wasn’t sure there would be quite enough, as it was much narrower than usual. It was the right decision in the end as I had to be a little creative with the top and make a *stepped* front hemline. If you look at the picture of the whole outfit (below), you will see that the center panel of the blouse is a little shorter than the side ones. I didn’t bias hem that piece to prevent *cutting* the visual line across an unflattering width…. 😉

Rose Marie has the typical 1940’s sweetheart neckline which I find so feminine and pretty, especially for summer clothing. As I mentioned, I made it sleeveless. The instructions were very helpful and clear, explaining how to sew up the pattern in true ’40s style, with a side zipper or hooks and eyes or snaps. I opted for a zipper and although I used an invisible zipper, I did follow the instructions to make it hidden under a narrow placket. It does look better that way!

HPIM6907 Bias tape binding both front and back sweetheart necklines.

HPIM8064 The placket over the invisible zipper, on the side of the blouse.

HPIM8066 The bound blouse hemline.

As for the skirt, I chose to make an elasticized waistband (more comfortable and easier to pull on: my fingers have trouble these days with buttons, hooks and snaps even zipper pulls!) with an uneven hemline: the front being a few inches shorter than the back. There are instructions and indications on the pattern for making the skirt as well as for making a separate top.

In order to make an elasticized waistband, I cut the fabric straight up from the waistline, for 3 1/2 inches. That’s double the width of the elastic plus a little to turn under to make the casing. That seam line is sewn right on the waistline. I call this a *self-waistband*: it has no seams (less bulk too) and uses less fabric than making a facing which has to be sewn onto the skirt and then turned under to make the casing. I really had to be frugal with the fabric!!!

I made an uneven hem line because I wanted the skirt to be longer but because I realized in placing the pattern pieces on the fabric that there just wouldn’t be enough of it, I opted to make it shorter at the front and keep the length I wanted for the back.

One of the pictures included in the pattern shows a day suit of blouse and skirt. It shows how the skirt was trimmed with red (bias binding?) at the skirt hem and the same red is on the neckline and sleeve cuffs. I really liked that detail. I was able to find a light blue bias tape, pre-folded, that matched my fabric and so, I finished many edges with it: the curves of the sweetheart neckline both front and back and the lower hem of the blouse as well as the skirt’s hem. The binding adds a little body to the blouse’s hem and I like that effect.

HPIM6906  Pre-folded Bias Tape made hemming easy. It allowed me to have more length on the skirt as I wasn’t folding up a hem.

  HPIM8067  HPIM8065

The front and back views of my version of Rose-Marie.

East meets west as they Wrap into one.

Here is another example of the interesting historical patterns which can be found at the VPLL website, offered as part of the VPLL’s 1912 Sewing Project. This is a 1912 fringed lady’s wrap with deep scallops, almost like bat wings! As soon as I came across it, I knew what fabric I wanted to use! I had a remnant from a sari I bought last fall. I made a circle skirt with the body of the sari and kept the pallu: that’s the especially ornate, decorative and patterned end of the sari which is usually thrown over the left shoulder.

I love saris. I was first introduced to them at about 8 years old, when my father befriended someone who worked with him at the CBC who was married to a lovely little Indian lady named Shakuntala. We often shared meals and eventually she gave my sister and me an old pure silk sari in shades of violet and black. It was printed with the perennial paisley design so dear to India. I still have it in my closet!

Anyway… my love affair with saris and most things Indian most assuredly started then.

As I digress nostalgically about saris, I mustn’t forget my present project.

The sari I bought last fall had bright colours: red, yellow and blue-green melding into each other and a Jacquard pattern woven into it which reminded my husband of fish scales. He thought it would be a good base for a Hallowe’en costume, as we had been invited to a party and I was still looking for a good costume to make. The blue-jade ran down the centre of the sari and as soon as he said that, I saw a siren’s tail… That will be the subject of another blog one day… So the sari was bought and quickly transformed into a skirt (see the second picture: that’s the circle skirt hanging to stretch before hemming it) which would become part of *Sedna*.

 

And there I go again! I was saying that I knew immediately upon seeing the pattern that I would use this remnant. The pallu is mostly red and yellow with dashes of blue-green and I was a little worried it wouldn’t be big enough to accommodate the wrap… but I was wrong. There was plenty! There was even enough to cut the tie linings but not enough to line the main body of the wrap.

 

I STILL have smaller bits which are folded away now that will undoubtedly be used as accents somewhere. They are packed away with several other saris awaiting their turn for use! And there I go again… It must be because I am in a very quiet house tonight: everyone is away at work or chumming with old friends. I can actually think, compose and write as well as savour my wine at the computer without guilt and without interruption!

The wrap pattern consists of only 3 pieces: two different length ties and the wrap itself. While I was placing the pattern on the fabric I was wondering what I would use as a fringe. I have several lengths of satin fringe, but most of them are black… I didn’t want that kind of contrast. The instructions also called for a lining. I did cut one out of bright red lining although I wasn’t certain I would want it. I thought it would be a convenient cover to hide the fringe band if I used a fringe.

I stay-stitched all around the wrap as it has scalloped edges and they tend to stretch even with *ordinary* fabric. But sari fabric is often rather loosely woven. This one is especially. So, to prevent too much distortion and stretching I stay-stitched.

My search amongst my treasures turned nothing up at first… So I went ahead and started sewing the ties to their linings. As I strolled over to my ironing board to press them I caught sight of a piece of beaded fringe a special friend gave me. I used to make belly dance and tribal costumes (for others as well as myself) and this is left over from those days! The fringe is gold, red and green. The gold was a perfect match for some of the yellow shading in the sari and the red and the green just worked too! There is a pattern within the fringe: red roses with a green leaf on either side. A 4” glass beaded fringe is a little heavy, but it doesn’t matter much to me. I figured it would help keep the wrap nicely pulled down to show the beautiful woven as well and dyed patterns in the fabric. Best of all: the fringe is beaded onto a yellow ribbon. I measured it and it was as if it had been cut especially for this project! Perfect fit!

So I carefully sewed the fringe on to the edge of the wrap with a zipper foot, still thinking I would line it. I actually did sew most of the lining to it as well, afterwards. But it felt wrong. I stopped sewing and took the lining off. I decided to use the yellow ribbon as the cache for the cut edge. I turned in the seam allowance under the ribbon and sewed the ribbon down over it. A very clean finish! After some consideration, I decided to sew a  narrow red satin ribbon on the right side of the wrap. It seemed to need it.

The ties could have a pleat or not. I chose to simply sew them flat to the wrap ends, as I intend to use them to tie around the waist at times… Easily done! I carefully top-stitched the ties on and there you are! The wrap was done swiftly. If it hadn’t been for the search for the fringe, it would have been done in an afternoon. This is an easy project for beginners and pros alike!

The best part of this is: I can use the wrap as a shawl, as it is intended to be, or as a hip scarf over the matching skirt! I don’t *dance* much anymore but I love my bright colours in summer and this certainly fits THAT bill! I will wear the skirt and wrap with a solid coloured t-shirt and it will look just dandy!